Aluminium door service · Warsaw and nearby areas

Aluminium door repair in Warsaw

Door leaf adjustment, hinge, lock and hardware repairs, plus door closer servicing — without replacing the complete door when the existing structure can be restored safely.

Is the door rubbing the threshold, failing to latch, resisting at the lock or slamming shut? We identify the cause first, then select the appropriate adjustment, repair or replacement part.

  • Clear diagnosis
  • System-matched parts
  • Final function check
+48 786 510 832 Send photos

For an initial assessment, send a photo of the complete door, hinges, lock faceplate, handle and door closer, and include your district.

Black aluminium entrance door at a building
Aluminium door service — alignment, hardware and door closer
Door alignmentCorrection of door leaf position and closing
Hinges, locks and handlesRepair or selection of worn components
Door closer serviceAdjustment, securing and replacement after diagnosis

Fault diagnosis

When does an aluminium door need servicing?

The same symptom can be caused by the door leaf alignment, hinges, lock, strike plate or door closer. That is why we inspect the complete door system before deciding on the repair.

The door has dropped or rubs

The leaf catches the threshold or frame, the gaps are uneven, or extra force is needed to close it.

  • Door leaf position correction
  • Hinge and fixing inspection

The lock or handle resists

The handle is loose, the latch misses the strike plate, or the locking mechanism no longer operates smoothly.

  • Lock and strike plate alignment
  • Repair or replacement of a worn component

There is a gap or draught

Air enters around the leaf or threshold, or the seal has hardened, split or is compressed unevenly.

  • Pressure and seal inspection
  • Threshold and locking point check

The closer slams or will not latch

The door closes too quickly, stops short of the lock or rebounds from the frame.

  • Door geometry check before adjustment
  • Door closer adjustment or replacement
Do not force the door

If the leaf rubs or the lock is out of line with the strike plate, forcing the handle can accelerate wear to the hardware, hinges and aluminium profile.

Repair scope

What can we repair on an aluminium door?

The repair is matched to the profile system, hardware type, weight of the door leaf and the actual cause of the fault.

Door leaf

Door adjustment

Height, lateral position and closing pressure are corrected so the leaf moves evenly and closes without rubbing.

Hinges

Hinge service

Adjustment, fixing inspection and hinge replacement where the construction and availability of a compatible part allow it.

Lock

Locks and locking points

Alignment of strike plates and servicing of cylinders, lock cases and mechanisms responsible for secure closing.

Handle

Handles and pull bars

Loose fittings are corrected and a suitable replacement handle or pull bar is selected when required.

Sealing

Seals and threshold

Inspection of compression, seals and the contact at the threshold, with worn profiles replaced after matching.

Glass

Door glazing unit

Measurement and replacement of damaged glazing when the system permits safe removal and installation.

Door closing devices

Door closer adjustment and repair

A correctly functioning closer should control the door smoothly and bring the leaf to a secure latch. We first check the door alignment, hinges, lock and movement resistance, because closer adjustment cannot correct every mechanical fault in the door.

What may be adjustable

Available settings depend on the closer model and how it is installed.

  • Closing speed through the main sweep
  • Latching action near the closed position
  • Closing force or backcheck where the model provides it
  • Position of the standard arm or slide channel

When replacement is required

Adjustment will not solve a fault if the unit is worn, damaged or unsuitable for the door.

  • Oil leakage or loss of resistance
  • Bent arm or loose closer body
  • Damaged slide channel or fixing
  • No available setting achieves reliable latching
Type 01

Standard arm

We check the fixing, arm geometry and the adjustments provided by the specific unit.

Type 02

Slide channel

We inspect the slide, channel position and the parameters available on that model.

Type 03

Concealed or floor spring

Service options are assessed from the system identification, access and condition of the mechanism.

Important when adjusting a closer

Adjustment valves should not be unscrewed at random. Opening them too far can cause leakage and permanent damage. Settings on fire and smoke doors must preserve the correct operation of the complete doorset.

Service process

From your enquiry to the final check

Each stage is intended to address the cause of the fault rather than temporarily conceal the symptom.

Photos and symptoms

You send photos of the door, describe the fault and provide the district.

On-site diagnosis

We inspect the alignment, hinges, lock, sealing and door closer.

Scope and cost

We explain what needs adjustment, repair or replacement and agree the cost.

Repair work

We adjust the mechanisms or install compatible components.

Function check

We test opening, closing, locking, latching and the operation of the closer.

Gallery

Select a photo to open the larger view. The full-size image is loaded only when the photograph is opened.

Aluminium entrance door after adjustment
Aluminium door fitted with a door closer
Surface-mounted door closer adjustment
Black door closer service
Door closer mounting inspection
Door closer replacement
Setting door closers on a pair of doors
Door closer with a standard arm
Surface-mounted door closer
Keypad lock on an aluminium door
Door lock and handle service
Door handle service
Door hinge adjustment
Door hinge alignment
Hinge for an aluminium door
Door alignment and closing check

Quotation

How much does an aluminium door repair cost?

The price depends on the door construction, adjustment required, hardware type, access to the fixings and any replacement components.

Photos help with an initial assessment, but the final scope is confirmed after inspecting the door. Before work begins, we agree what will be done and the expected cost.

Preparing your enquiry

Send a photo of the complete door, hinges, lock and closer. Add a short description of the fault and your district.

View indicative prices Call and describe the fault

Service across Warsaw and nearby areas

We visit flats, houses, offices, shops and commercial premises throughout Warsaw. Travel outside the city is arranged individually in advance.

  • Bemowo
  • Białołęka
  • Bielany
  • Mokotów
  • Ochota
  • Praga-Południe
  • Praga-Północ
  • Rembertów
  • Śródmieście
  • Targówek
  • Ursus
  • Ursynów
  • Wawer
  • Wesoła
  • Wilanów
  • Włochy
  • Wola
  • Żoliborz

By prior arrangement, we also cover selected places near Warsaw, including Pruszków, Piaseczno, Raszyn, Łomianki, Marki and Ząbki.

+48 786 510 832 Send photos

Questions

Frequently asked questions

Useful information before arranging an aluminium door repair or adjustment.

Can a dropped aluminium door be adjusted?

Often it can. The available adjustment depends on the hinge design, weight of the leaf, condition of the fixings and whether the aluminium profile itself is undamaged.

Why has the door closer started slamming?

Possible causes include incorrect closing or latching speed, poor leaf alignment, lock resistance, loose fixings or wear within the closer.

Can every door closer be adjusted?

No. Available settings vary by model. A leaking unit, a closer with no resistance or a damaged arm may need replacement rather than adjustment.

Do you repair locks, handles and hinges?

Yes. We inspect and service the parts responsible for supporting and locking the door leaf. Replacement depends on identifying the system and sourcing a compatible part.

Do you service shop and office entrance doors?

Yes. We accept enquiries for homes, offices, shops and other premises. Access arrangements and a suitable working time are agreed before the visit.

Can the glass in an aluminium door be replaced?

In many systems it can. We first measure the opening and check how the glass is retained, then specify a suitable glazing unit.

Which photos should I send before the visit?

Please send the complete door from the hinge side, close-ups of the hinges, lock faceplate and strike plate, the handle, and the closer showing its arm or slide channel and model marking.

Is the door rubbing, failing to latch or slamming shut?

Call us or send photographs. We will discuss the symptoms, advise what additional details may help and arrange a possible visit in Warsaw or the surrounding area.

+48 786 510 832 Send photos

Clear diagnosis • Appropriate repair scope • Final function check